Ταινία Διπλής Όψεως 0.2mm x 30mm x 3m Transparent Nano Mounting

[Συνδεθείτε για τιμές]
99320-027
Σε απόθεμα
Συνδεθείτε για τιμές

Συνδεθείτε για αγορα

Ταινία Διπλής Όψεως 0.2mm x 30mm x 3m Transparent Nano Mounting

Technical data
----------
Load capacity: up to 1 kg / 3 cm2
Temperature resistance: 10 ~ 40 ° C
Elongation at break: 300%
Tensile strength: 8.5 ~ 14.5 N / cm
Adhesion to materials: flat and non-porous - marble, glass, tiles, metal, plastic, etc.
Material: PU gel
Thickness: 2 mm
Width: 30 mm
Length: 3 m
Weight: 210 g
Color: transparent

----------
Main features
----------
Durable, washable, reusable tape
Resistant to changing weather, ozone, moisture, immersion in water
Leaves no traces and does not damage surface
Wide application

The tape is equipped with a plastic spacer, which should be removed before application.


INSTRUCTIONS:

1. Measure the required length of the tape. Cut only one strip at a time.
2. Place the tape on the surface with the sticky side down and press it down. Use enough tape (e.g. for hanging a picture, stick tape on all sides of the frame).
3. Peel back the backing to expose the other side of the tape.
4. Place on the surface to which to stick. IMPORTANT: Press down firmly on the area to be glued for 15-30 seconds to ensure proper assembly.
5. To remove the tape, pull the edge.

For best results, clean both surfaces prior to application. When applying to glass or stainless steel surfaces, use a glass cleaner. Make sure the surface is flat, dry, clean and non-greasy.
When used on painted surfaces, the application will be permanent. Removing the tape may cause the paint to peel off.
Tip: To efficiently remove the tape from the painted surface, sprinkle water on the edges of the tape to avoid damaging the surface.

Παρόμοια Προϊόντα

Νέες Παραλαβές